Submersible pump pontoon module complete with a weld mesh grilled box section to protect any pump selected from larger solids.

Used Pumpex PX12N submersible pump with 6” male Bauer outlet. Driven by a 21kw, 400v, 50hz electric motor with at least 20m of IDS cable attached.

Used Sulzer (ABS) AFP2571 MI450/4.44 submerisble pump with 8" outlet driven by a 45kw, 415v electric motor with at least 10m of heavy duty power cable.

Used Flygt 3102.180 MT with 4" outlet and 430 impeller. Driven by a 3.1kw, 415v electric motor with at least 10m of heavy duty rubber power cable. Suitable for passing a maximum 76mm in suspension. Ideal for pumping liquids containing solids and fibres.

Used Grundfos Unilift AP35B.50.06.1V submersible pump with 2” female BSP outlet and 35mm maximum solids handling.

Used Flygt 2620.170MT drainage submersible pump with 3" male Bauer outlet and 233 impeller.

Used Sulzer AS0831.205-S22/4EX submersible with DN80 discharge and 80mm solids handling. Driven by a 2.2kw, 415v EX-rated electric motor with at least 10m of power cable attached.

Used Flygt 2400.402 submersible drainage pump with 6” flanged outlet and fitted with 232 MT impeller.

Used Jung US73 submersible pump with 1.1/2” female BSP outlet and 30mm solids handling. Driven by a 0.5kw, 230v electric motor with automatic float arm and at least 10m of power cable attached.

Used Sabre KSV-400V submersible pump with 2” female BSP outlet and 20mm solids handling. Driven by a 230v, 0.4kw electric motor with automatic tube float and at least 10m of power cable attached

Used Audex 6-900TC submersible agitator pump with 6" flanged outlet. Driven by 9kW, 415v, 50hz electric motor with at least 10m of heavy duty power cable attached.Submersible slurry pump with a 4-pole motor for an increased lifetime and greater convenience

Driven by a 4kw, 415v, 50hz electric motor with at least 10m of heavy duty cable attached. Submersible slurry pump with a 4-pole motor for an increased lifetime and greater convenience. High chrome alloy impeller combined with agitator for pumping heavy slurry. Slim design with a top discharge enabling installation in smaller casing.

New Xylem / Flygt 2660.181 SH submersible drainage pump with 3” hosetail outlet and 276 impeller. Close coupled to a 10kw, 400v electric motor with at least 20m of cable attached. Ideal pump for pumping water or liquid which contains concentrations of abrasives with its hard-iron impeller.

Used Shimge QDX1.5-32-0.75 submersible drainage pump with 1” hosetail outlet and 5mm solids handling. Driven by 230v, 0.75kw electric motor with automatic float switch and at least 10m of power cable attached.

Used Arven SPA9000 submersible drainage pump with 1.1/4” female BSP discharge. Driven by a 0.75kw, 230v electric motor and fitted with automatic float switch along with at least 10m of cable.

Used Ebara BEST 3M submersible drainage pump with 1.1/2” female BSP outlet and 10mm solids handling. Driven by a 230v, 0.75kw electric motor with at least 10m of cable attached.

We have 3 fully submersible former water company pumps with EExd motors for sale.

All manufactured by Bedford Pumps UK with discharge sizes, flow rates, max heads and kW vary as stated.

Used SPP RW4041 DO submersible hard iron pump with 3" male Bauer outlet.

Driven by a 415v, 7.5kw electric motor fitted with at least 10m of power cable.

Used Flygt 3171.091 submersible pump with 6” flanged discharge and fitted with 430impeller. Close coupled to a EX rated, 22kw, 400v electric motor fitted with at least 10m of cable. Currently guide rail mounted with bracket but can be converted to free-standing or Bauer outlet.

These used Bedford SV45.34.08X fully submersible pumps are from a former water company with a 2008 year of manufacture.

Used Grindex Master N submersible drainage pump with 4” male Bauer outlet.

Driven by a 10kw, 415v 50hz electric motor with at least 20m of heavy duty rubber power cable.

Used Flygt 3231/665 submersible pump with 430/375mm impeller and 8" flanged discharge connection.Driven by a 85kw, 400v electric motor with at least 10m of heavy duty power cable.

Used AFEC FS437 submersible drainage pump, with 4" outlet. Driven by a 415V 3.7 electric motor with at least 10m of power cable.

Used Grindex Magnum N drainage submersible pump with 8” male Bauer delivery branch. Driven by a 54kw, 400v, 50hz electric motor with at least 20m cable attached with 125a, 5pin, 415v plug attached.

Nearly new APP DSK-20 submersible cutter pump with 80mm discharge flanged connection. Driven by a 400v, 1.5w electric motor with at least 10m of heavy duty power cable attached.

Grindex Major H submersible drainage pump complete with 3” male BSP outlet, which can be supplied with male Bauer or other fittings at additional cost.

UUsed Flygt 3057 submersible pump with 2" outlet suitable for clean water, surface water, and light wastewater containing solids or fibre material.

Used Tsurumi KTVE21.5 submersible drainage pump with 2" male Bauer outlet. Driven by a 400v, 1.5kw electric motor fitted with at least 10m of heavy duty rubber power cable.

This is a new Tsurumi HS3.75 submersible agitator pump with 3” hosetail outlet. Driven by a 0.75kw, 110v electric motor with at least 10m of heavy duty rubber power cable and a 110v rated industrial plug.

Used Flygt 2102MT submersible drainage pump with 4" male Bauer outlet and either 231 or 232 impeller. Driven by a 5.2kw, 415v electric motor with at least 20m of heavy duty rubber power cable.

Used Tsurumi KTVE2.75 submersible drainage pump with 2" male Bauer outlet. Driven by a 400v, 0.75kw electric motor fitted with at least 10m of heavy duty rubber power cable.

Used Hidrostal A2 submersible solids handling pump with 2" male Bauer outlet. Driven by a 415v electric motor fitted with at least 10m of heavy duty rubber power cable. The pump will be sold fully checked serviced and tested prior to sale.

Used ABS J205ND submersible drainage pump with 6" male Bauer outlet. Driven by a 22kw, 415v electric motor with at least 10m of IDS cable attached. Suitable for passing a maximum 8mm solid in suspension.

Used Grindex Midi N submersible drainage pump with 6" male Bauer outlet. Driven by a 11kw, 415v electric mtoor with at least 20m of heavy duty rubber power cable attached. Suitable for passing a maximum 8mm solid in suspension.

Used Afec FS322 submersible drainage pump with 3" male Bauer outlet. Driven by a 2.2kw, 415v electric motor with at least 20m of heavy duty rubber power cable attached. Suitable for passing a maximum 9mm solid in suspension.

Used GODWIN GSP300HH submersible drainage pump with 6" male Bauer outlet. Driven by a 24kw, 415v electric motor with at least 10m of heavy duty rubber power cable. Suitable for passing a maximum 8mm solid in suspension.

8" Flygt 3200 97003-191 submersible pump fitted with a 3 phase, 50Hz, 28HP / 22.5kW, 415V motor. Sold in good working order and has recently been fully serviced. Fitted with new 12m power cable. Comes with 1 months warranty.

Pumpex K207 submersible drainage pump complete with 42kw, 400v electric motor and at least 15m of HO7RNF cable included, IDS (Mine&Quarry) cable available as extra POA. 1999 year of manufacture and includes a 8" male Bauer outlet and strainer stand as pictured. Unit has had new mechanical seals, o rings and bearings fitted recently, but currently needs inspection for an electrical fault following pump burning out on recent install hence low price "sold as seen" option.

The Flygt 3152 is a submersible waste water pump designed to pump liquid containing solids. These compact reliable pumps feature two mechanical face seals in tandem, stainless steel shaft, replaceable wear ring and are simple to maintain

This is a 100mm KSB KRT F100, a fully submersible pump which can handle a flow of 30 litres per second at a max head of approximately 9m. This pump has a 7.5kW motor suitable for operation on a 415V, 3 phase,50hz electricity supply. Can handle solids of up to 100mm diameter.

Flygt Mixer 4640.410, 2.5 kW, x 415 volt, 6.2amp, 50Hz.
In good working order.
Propeller Dia: 368mm
Speed: 702 rpm

Flygt 3085 waste water pump will handle liquids containing solids (grinder type). It has recently been reconditioned by Stuart Pumps, and is in excellent condition. With 3 phase, 50Hz, 2.4kW, 400V motor. Delivery available.

Flygt 2630MT Submersible pump ideal for dewatering building yards, trenching, draining water in flooded areas and other similar applications. Supplied with at least 10m of standard H07 cable attached. If required IDS (individually screened) cable is available at additional cost.

Flygt 3127.090 submersible pump. With a 3 phase, 50Hz, 5.9kW, 415V with standard motor. Manufactured in 2005. Delivery available, we have two in stock.
Flow: 80 l/sec Head: 18m
Impeller Dia: 461imp
Outlet: 150mm
Cable Length: 10m

VP3-110 4" outlet submersible pump with non-clog impeller. 11kW / 415V / 1500rpm. Comes with 10m of cable.

Sold having only been used for 6 hours, A manual series of pump with 200mm BSPM/flange, 52m head and a flow rate of 5400 l/min. This pump operates at 2946 rpm, 400v, 37kW. The LH series are heavy-duty, high head pumps that provide exceptional wear resistance and outstanding performance in the toughest civil engineering or water supply projects

Flygt 2640MT Submersible pump ideal for dewatering building yards, trenching, draining water in flooded areas and other similar applications. Available with at least 10m of standard H07 cable attached. If required IDS (individually screened) cable is available at additional cost

Sold Flygt 3085.182 MT DN80mm submersible pump for de-watering building yards, draining water in flooded areas and other similar applications. Small in size and easily maintainable.

Sold Flygt 3085 submersible pump designed to pump waste water and liquids containing solids. With 3 phase, 50Hz, 1.3kW, 415V motor. Recently reconditioned by Stuart Pumps, in excellent condition. Delivery available.

ABS J205 ND-977 6" (20kW / 415V) submersible drainage pump with 20m of hose and male Bauer outlet. ideal for pumping water and dirty water mixed with soil. When delivered to a site you can start using them right away. The low weight and compact design ensure convenient transport, handling, and installation. Just plug and pump!

ABS AFP1543.2B - BS AFP2045.1 - ME185/4 submersible sewage pump. With 8 inch male Bauer outlet and 20m of cable. Currently freestanding with guide rail mounting available at additional cost. 400V / 1450RPM / 20kW. We stock a large range of rental water pumps and pumps to buy online.

Flygt 2125.181 4" submersible pump for de-watering building yards, draining water in flooded areas and other similar applications.

Flygt 2125.181 4" submersible pump for de-watering building yards, draining water in flooded areas and other similar applications.

100mm submersible sewage pump. Almost new with Bauer outlet and 20m of cable 400V / 1450RPM / 4.0kW.

This is a very robust, compact pump ideally suited for dewatering and drainage in many industrial applications. With 3ph, 50Hz, 5.2kW. 20 mtr of cable included, delivery available.

Flygt 2125 Pump with Bauer fitting included. The Flygt Bibo series deliver in the toughest of dewatering tasks. These hard wearing, lightweight pumps are found in operation in all types of dewatering applications including mining and construction. 8kW / 2900rpm.

6" Flygt 2151.011-0170112 submersible pump. Designed for dewatering and drainage in many industrial applications. The 2151 is also the perfect all-rounder for emergency situations. Handling abrasive liquids or pumping sediment-heavy media from tanks, sumps and containers.

Flygt B2201.011-0181 submersible pump. With 3 phase, 50Hz, 37kW, 415V motor. Recently reconditioned by Stuart Pumps, in excellent condition. Delivery available.

Flygt 3140.180 submersible pump. With 3 phase, 50Hz, 9kW, 415V motor. Delivery available.

Flygt 3085 MT submersible pump with a capacity of up to 22 l/sec covers a number of applications. Available as a free-standing unit which can be converted to be used with a guide rail quick release coupling system on request.

Flygt 3300.181-S9920013 submersible pump. With 3 phase, 50Hz, 40kW, 380V motor. Delivery available.
Flow: 280 l/sec Head: 22 mtr

4" submersible, 8kW / 415V / 50Hz, sandy pump with agitator and an external jet impeller, capable of pumping solids up to 45mm. Made of chrome hard steel for full abrasive duties such as dredging or washing plants. The Flygt Robot wear resistant submersible vortex pumps are designed for the continuous transport of highly abrasive solids.

Grindex Matador 24 kW submersible pump with 6" male Bauer outlet and 20m of IDS cable.

Grindex 4" Major N electric submersible drainage pump.
7.6kW, 415V, 50Hz
This pump is very popular in the Grindex drainage range.
The hydraulic design ensures high wear resistance which dramatically reduces poor performance caused by long term wear.

KSB KRT K 555/517 submersible motor pumps for sewage and effluent. The KSB range are economical and easy to service. They are designed for both temporary and permanent installations. These pumps have proven to be very cost effective as they eliminate the need for expensive structures as well as suction pipework valves. Ex Yorkshire water authority unused stock. We have used for a total of 8 weeks. Flanged elbow included.

Sarlin S3 1306 L1A electric submersible pumps. We have three Sarlin, heavy-duty, waste water pumps available. The pumps are in excellent condition and have never been used. Coupled to a 415V / 130kW electric motor.

Pumpex 254F 6" (150mm) pump. Fixing is guide rail, can be adapted to stool-free standby - 62kW / 415V.

Pumpex KP154F 6" (150mm) solids handling pump. Fixing is guide rail, can be adapted to stool-free standby - 55kW / 415V
Flow: 600 m³/hr

This pump was bought in error and has only been used 1 day for demonstration purposes. Total running time is less than 6 hours. Repainted, product like new.

The KTV2 and KRS2 series pumps have a similar construction to the KTV and KRS drainage pumps respectively; however for increased wear resistance their impellers are in chromium iron. The KTV2 and KRS2 pumps have a built in agitator, also in chromium iron, to stir sand and silt into suspension for pumping.

The LH series are heavy-duty, high head pumps that provide exceptional wear resistance and outstanding performance in the toughest civil engineering or water supply projects. Constructed of cast iron, the centre discharge design reduces the base area size and facilitates locating and positioning in confined spaces. This design also enables efficient motor cooling when pumping small amounts of water or even during dry running conditions.

Sykes KP156F 6" electric submersible pump
400V / 1450RPM / 15kW.
Flow: 100 ltr/sec Head: 18mtr

Used Grindex 6" Maxi H electric submersible pump 41kW, 400V, 50Hz
Max Flow: 50 ltr/sec Max Head:90m Max Solids:12mm Speed:2950rpm