We have a large range of submersible pumps (over 500 in stock) that are suitable for pumping slurry, sewage and other heavy duty applications. Each submersible pump is fitted with at least 10m of power cable.
All our submersible pumps will be fully tested and serviced to be in good working order prior to dispatch. With over 25 years in the pumping industry, we only choose the highest quality pumps from manufacturers such as Flygt, ABS, Grundfos, Tsurumi, Sykes and more.
Don't hesitate to Contact Us for further information.
Five effluent pumps for sale.
We have 5 fully submersible former water company pumps with EExd motors for sale. All manufactured by Bedford Pumps UK. Discharge sizes, flow rates, max heads and kW vary as stated. All pumps complete with suction bellmouths and flanged outlets. Some pumps include guide claw facility.
All pumps will be fully serviced and checked prior to sale. 3 month UK warranty available.
Transport also available at additional cost.
ABS Submersible mixed flow column pump. Fitted with a 37kw, 415v, 50hz explosion proof motor with at least 10m of cable attached. Suitable in many applications where high flow rates are required at low heads. Pump is fitted with several sacrificial anodes included.
Nominal flow rate: 2700m³/hr - Nominal head: 2m
ABS J205 ND-977 6" (24kW / 415V) submersible drainage pump with at least 15m of cable and male Bauer outlet. Ideal for dewatering abrasive and clean water from construction sites, quarries and flooded areas.
The compact design ensures for convenient transport, handling, and installation. Just plug and pump!
Flow: 100 l/sec
ABS J604ND with 10" or 12" male quick action coupling. Ideal for dewatering flooded areas when large flow rates are required along with storm water or high volume wash down applications. Although originally designed for industrial use these are also adaptable for the building, mining and clean/dirty water pumping applications. With integral overloads suitable for direct connection to your power supply. The 415v / 1450rpm / 56kW motor is supplied with at least 20m of cable attached. Additional lengths or IDS (individual screened cable) cable available at additional cost.
We have 2 available ready to pump.
MAX Flow: 300 l/sec
MAX Head: 30m
Starter box, extra: P.O.A
Flygt 2102 MT submersible drainage pump with 231impeller, 4” male Bauer outlet and 5.2kw, 400v, 50hz electric motor along with at least 10m of cable attached. Suitable for dewatering, clean water supply and site drainage applications among many more.
3 in stock, 1 Currently On Hire
Max Flow: 38 l/sec
Max Head: 24m
Flygt 2102.040 MT submersible drainage pump complete with 60/50hz, 460v, 6kw electric motor with at least 20m H07RNF cable attached, but can be changed to IDS (mine&quarry) at extra cost. 4" hosetail or Bauer outlet can be supplied. Ideal drainage pump for many dewatering applications.
Max Flow: 40l/s (at 60hz)
Max Head: 26m (at 60hz)
Why not enquire about our range of starter control panels to suit this pump
£4,200.00 (HT) - 2 Available
£4,300.00 (MT) (CURRENTLY ON HIRE)
£4,400.00 (LT) (CURRENTLY ON HIRE)
Flygt 2151.011 HT/MT/LT (High Head) (Medium Head) & (Low Head). These submersible pumps are designed for dewatering, building yard, draining water in flooded areas, and other similar applications. The pump can handle water containing relatively abrasive solids. We have one of each impeller type available. These pumps are similar in power usage and speed but the output does differentiate as can be seen via the corresponding links to the right.
Flygt 2250.011 MT 432impeller 10" submersible pump which can be operated at either 50Hz or 60Hz. The pump has a maximum immersion depth of 20m and can vary in performance with flow of 280l/s at 50Hz and 290l/s at 60Hz. solids handling 15mm x 45mm. Fitted with 20m of standard H07 cable.
Flygt 2620.170MT Submersible pump ideal for dewatering building yards, trenching, draining water in flooded areas and other similar applications. Available with at least 10m of standard H07 cable. IDS (individually screened) cable available at additional cost.
With its own level switch attached to prevent dry running this is a fully automatic site friendly option.
We have two of these available for sale.
Flygt 3085 HT submersible pump, suitable for pumping 19 l/sec with a max head of 24m. This pump has a mid flow point of approx 8 l/sec @ 15m. Pump suitable for installation within limited spaces and can be adapted for free standing usage in preference to the guide rail arrangement shown.
Description: Flygt 3127.350 MT submersible chopper pump 439 impeller complete with 6" male Bauer outlet along with 4.7kw, 400v, 50hz electric motor and at least 10m of electric cable attached, with longer lengths available at extra cost. Ideal for moving liquid manure, fish waste or heavily contaminated sewage and sludge. Pump impeller fitted with cutter insert ring both manufactured in Hard-Iron.
Guide claw available at extra cost
Max flow: 65l/s
Max head: 15m
Flygt 3127 LT submersible pump with a capacity of up to 80l/sec covers a number of applications. Available as a free-standing unit which can be converted to be used with a guide rail quick release coupling system on request. Fully cleaned and serviced with at least 10m of cable, additional cable is available at extra cost. Designed to pump liquid containing solids, partial sludge or sewage and waste water.
4" Fully submersible with a capacity of up to 65 l/sec covers a number of applications with 3 phase, 50Hz, 9kW, 400V motor, 1450 rpm. Delivery available. Fully tested and serviced with at least 10m of cable.
Manufactured 2005. Delivery available. 1 in stock
Max Flow: 65 l/sec Max Head: 26m
The Flygt 3152 is a submersible waste water pump designed to pump liquid containing solids. These compact relaible pumps feature two mechanical face seals in tandem, stainless steel shaft, replaceable wear ring and are simple to maintain. Recently refurbished. Delivery available
Flow: 90 l/sec Head: 21 mtr
Impeller Dia: 432mm
Flygt 3127 LT 200mm submersible pump with ability to pump 100 litres per second at a maximum head of 12m. Max solids handling is 76mm and is designed to handle soft solids for either drainage or slurry.
Pump has a 90 degree elbow and 8" male Bauer coupling for a free standing design and is fitted with a 5.9kw motor suitable for operation on a 415V, 50Hz supply. Delivery is available and as with all our submersible pumps this comes with at least 10m of cable and fully serviced before sale.
Flange can be drilled if required.
Flow: 100 l/sec Head: 12m
Grindex 8" Maxi NDOL fully submersible pump .
This Grindex drainage pump similar to design of the Flygt 2201 MT. A heavy duty industrial strength pump, light weight and portable in design. Designed to deal with large quantities of dirty water.
Sold in good working order having been fully serviced and re-painted.
Max Flow: 165 l/sec Max Head: 46m
Grindex Major N submersible drainage pump complete with 3” male BSP outlet, which can be supplied with male Bauer or other fittings at additional cost. Fitted with 5.7kw, 400v, 50hz electric motor with at least 10m HO7RNF cable attached but additional lengths or IDS (mine & quarry) can be supplied at extra cost.
Starter Control Panels available at additional cost
Max Flow: 20l/s Max Head: 45m
Grindex 10" Magnum N electric submersible drainage pump.
Suited to heavy duty applications, such as construction, mining or industrial.
Built to handle contaminated water with a pH level of 5-8, operating with maximum liquid temperatures of 40 degrees Celsius.
Sold in good working order having been fully serviced and re-painted.
Max Flow: 150 l/sec Max Head: 48m Max Solids: 12mm Speed: 1475rpm
Grindex 6" Maxi H electric submersible pump.
41kW, 400V, 50Hz
GRINDEX MAXI H high head submersible drainage pump suitable for dewatering deep excavations or high pressure washing applications. The pump has a unique valve that will enable air cooling of the motor to allow dry running without damage. Suitable for operating in contaminated water with a pH ranging between 5-8.
Sold in good working order.
Max Flow: 55 l/sec Max Head: 90m Max Solids: 12mm Speed: 2950rpm
Grindex 3 " sandy pump with rubber liner. Used for less than 6 months.
Sold in good working order. 14kW (415V)
Grindex Sandy units are heavy duty and are ideal for discharging sludge and water with a high solids content of up to 75 mm. They are also suited to handle a variety of materials such as mud, sludge, as well as light slurry.
Flow: 40 l/sec Head: 24m
Pumpex K207 submersible drainage pump complete with 42kw, 400v electric motor and at least 15m of HO7RNF cable included, IDS (Mine&Quarry) cable available as extra POA. 1999 year of manufacture and includes a 8" male Bauer outlet and strainer stand as pictured. Unit has had new mechanical seals, o rings and bearings fitted recently, but currently needs inspection for an electrical fault following pump burning out on recent install hence low price "sold as seen" option.
An excellent pump for a quarry wash plant water supply or general dewatering.
Max Flow 210 l/s
Max head 32m
SPP RW4020DJ free-standing Robot Pump with 2" outlet, torque flow impeller for sand pumping with 415v electric motor and at least 10m cable attached. Vortex impeller is made from hard chrome steel. Bought new for project that never happened. Can be converted to guide rail mount option and supplied with control panel at additional cost.
Duty: 30 m³/hr @ 15m
Sykes (Pumpex) P-1000 HC electric submersible drainage pump. Cable to be fitted as per customer requirements. 10m included in price. 3 phase (50Hz) | 415V | 2.8kW | 4.3 Amps | 2850rpm.
This is a new pump, it was never actually used. It is being sold used as old stock.
Flow: 14 l/sec Head: 24m
The LH series are heavy-duty, high head pumps that provide exceptional wear resistance and outstanding performance in the toughest civil engineering or water supply projects. Constructed of cast iron, the centre discharge design reduces the base area size and facilitates locating and positioning in confined spaces. This design also enables efficient motor cooling when pumping small amounts of water or even during dry running conditions. Improved flow on a flyght 2400HT model pump.
The 420 stainless steel shaft is fitted with an ultra hard-wearing, silicon carbide, double mechanical seal (in an oil chamber). The LH675 has high water pressure resistance to permit operating in water up to 50m deep. In addition, an oil lifter is fitted to maintain seal lubrication during operation in any position. Supplied with IDS (individually screened cable). Ideally suited to quarry and mining applications. Enquire for more information.
Flow: 2440 l/min
Outlet: 150mm (BSPM/Flange)
Visit our Dredging Division for more information.
Fully re-built Tsurumi LH875 submersible pump complete with 75kW, 400v, 50hz electric motor and at least 20m of H07RNF power cable. Supplied with 8 inch flanged outlet connection.
Available in 5-6 working weeks
Max Flow: 390m³/h
Max Head: 70m
DP50 - 37kW Submersible Dredge Pumps. These submersible agitator pumps are specially designed to handle heavy and abrasive slurries. Robust construction and a careful selection of materials together with unique contour components, coupled with a low speed high torque motor, have produced a pump with excellent abrasion resistance.
Flow: 480 m³/h Head: 28m
|Model||Outlet||New / Remanufactured / Used||Cable||Price (£)|
|DP||- More models available -|
Visit our Dredging Division for more information.
Vaughan V00841 8" semi submersible shaft pump with chopper blade. Pre impeller shaft about 1.2m. Only used for 3 months. Vaughan pumps incorporate a unique combination of chopping and pumping, which delivers a truly non-clog system and as a result handle larger solids. 60HP (45kW)
Flow: 680 m³/hr
For sale Tsurumi LSC1.4S full submersible “Puddle Sucker” pumps. We have both the 1" or 2" version in our stock range. These submersible pumps operate on either 110V or 230 volt supply and offers both manual or auto operation with solids handling of up-to 6mm. Max flow is 160 litres/min. Ideally suited for pumping large or small areas of nuisance water found on flat surfaces.
For sale 2” Tsurumi 50PUA2.75 sewage pumps. This range of submersible pumps operate at 415V and have 0.75KW motors with an FLC at 1.5amp. We can offer this range in manual or automatic modes with solids handling at 35mm. Max flow is 355 l/min. Ideally suited for use by Utilities and industry for portable and fixed installations.
For sale 2” Tsurumi 50PU2.4 fully submersible sewage pumps. This range operates at 415V and have 0.4KW motors with a FLC at 1.2amp. This range is provided with manual operation only and has a solids handling capability of 35mm. Max flow is 270 l/min. Ideally suited for use with Utilities and Industry for portable and fixed installations.
For sale 2” Tsurumi KTVE22.2 fully automatic submersible pumps. This range operates at 415V having 2.2KW motors with an FLC of 4.3amps. Although the pumps are automatic yet we do have a manual option (Price On Application). Solids handling is 8.5mm with max flow of 200 l/min. Ideally suited for project dewatering.
50% of new web price
For sale 3” JS750 fully submersible pumps for operation on either a 110 or 230 volt supply. They have a solids handling capability of 46mm and a maximum flow of 500 l/min. Ideally suited for a range of domestic and industrial applications.
50% of new web price
For sale 2” Tsurumi KTVE2.75 fully submersible pump for operation on a 415V supply with a FLC of 1.8amps. They come in either automatic or manual. Solids handling is 6mm. Max flow of 180 l/min. ideally suited for various drainage applications
50% of new web price
DOL Starters consist of a single contact for the direct starting and stopping of a motor, for starters with forward and reverse directions there are two electrically and mechanically interlocked contacts so only one is connected to the motor at a time.
Star Delta Starters use contacts to reduce the voltage applied to each winding of 3 phase ac induction motors to about 58% of the line voltage. This reduces the starting torque and current for a variable amount of time (standard 1-30 seconds) and then switches over to Delta.
Soft Starters are used with AC electric motors to temporarily reduce the load and torque in the powertrain and electrical current surge of the motor during startup. This reduces the mechanical stress on the motor and shaft, as well as the electrodynamic stresses on the attached power cables and electrical distribution network, extending the lifespan of the system.
We offer a full range of motor starters up to 92kW that can be priced upon application.Make Enquiry
22kW Direct On Line Starter
37kW Direct On Line Starter
55kW Star Delta Starter
22kW ABB Soft Starter
|Optional Extra||Panel mounted or with 0.5m flying leads 63amp socket.||£85|
|Optional Extra||Panel mounted or with 0.5m flying leads 63amp appliance inlet.||£90|
|TQM3KC-37-SS-SP||37kW ABB Soft Starter
|Optional Extra||Panel mounted or with 0.5m flying leads 125amp socket.||£105|
|Optional Extra||Panel mounted or with 0.5m flying leads 125amp appliance inlet.||£110|
This is a 100mm KSB KRT F100, a fully submersible pump which can handle a flow of 30 litres per second at a max head of approximately 9m. This pump has a 7.5kW motor suitable for operation on a 415V, 3 phase,50hz electricity supply. Can handle solids of up to 100mm diameter.
Flygt 2630MT Submersible pump ideal for dewatering building yards, trenching, draining water in flooded areas and other similar applications. Supplied with at least 10m of standard H07 cable attached. If required IDS (individually screened) cable is available at additional cost.
Sold having only been used for 6 hours, A manual series of pump with 200mm BSPM/flange, 52m head and a flow rate of 5400 l/min. This pump operates at 2946 rpm, 400v, 37kW. The LH series are heavy-duty, high head pumps that provide exceptional wear resistance and outstanding performance in the toughest civil engineering or water supply projects
Sold Flygt 2620.170MT Submersible pump ideal for dewatering building yards, trenching, draining water in flooded areas and other similar applications. Available with at least 10m of standard H07 cable. IDS (individually screened) cable available at additional cost
Flygt 2640MT Submersible pump ideal for dewatering building yards, trenching, draining water in flooded areas and other similar applications. Available with at least 10m of standard H07 cable attached. If required IDS (individually screened) cable is available at additional cost
ABS J205 ND-977 6" (20kW / 415V) submersible drainage pump with 20m of hose and male Bauer outlet. ideal for pumping water and dirty water mixed with soil. When delivered to a site you can start using them right away. The low weight and compact design ensure convenient transport, handling, and installation. Just plug and pump!
ABS AFP1543.2B - BS AFP2045.1 - ME185/4 submersible sewage pump. With 8 inch male Bauer outlet and 20m of cable. Currently freestanding with guide rail mounting available at additional cost. 400V / 1450RPM / 20kW. We stock a large range of rental water pumps and pumps to buy online.
Flygt 2125 Pump with Bauer fitting included. The Flygt Bibo series deliver in the toughest of dewatering tasks. These hard wearing, lightweight pumps are found in operation in all types of dewatering applications including mining and construction. 8kW / 2900rpm.
6" Flygt 2151.011-0170112 submersible pump. Designed for dewatering and drainage in many industrial applications. The 2151 is also the perfect all-rounder for emergency situations. Handling abrasive liquids or pumping sediment-heavy media from tanks, sumps and containers.
4" submersible, 8kW / 415V / 50Hz, sandy pump with agitator and an external jet impeller, capable of pumping solids up to 45mm. Made of chrome hard steel for full abrasive duties such as dredging or washing plants. The Flygt Robot wear resistant submersible vortex pumps are designed for the continuous transport of highly abrasive solids.
KSB KRT K 555/517 submersible motor pumps for sewage and effluent. The KSB range are economical and easy to service. They are designed for both temporary and permanent installations. These pumps have proven to be very cost effective as they eliminate the need for expensive structures as well as suction pipework valves. Ex Yorkshire water authority unused stock. We have used for a total of 8 weeks. Flanged elbow included.
This pump was bought in error and has only been used 1 day for demonstration purposes. Total running time is
less than 6 hours. Repainted, product like new.
The KTV2 and KRS2 series pumps have a similar construction to the KTV and KRS drainage pumps respectively; however for increased wear resistance their impellers are in chromium iron. The KTV2 and KRS2 pumps have a built in agitator, also in chromium iron, to stir sand and silt into suspension for pumping.
The LH series are heavy-duty, high head pumps that provide exceptional wear resistance and outstanding performance in the toughest civil engineering or water supply projects. Constructed of cast iron, the centre discharge design reduces the base area size and facilitates locating and positioning in confined spaces. This design also enables efficient motor cooling when pumping small amounts of water or even during dry running conditions.