New and Used Electric Submersible pumps

Toyo DP50

Toyo 50 - 37 kW Submersible Dredge Pumps.

These submersible pumps with agitator, are specially designed to handle heavy and abrasive slurries. Robust construction, careful selection of materials and unique contour components, coupled with a low speed high torque motor, have produced a pump with excellent abrasion resistance as well as a sufficient weight and an important torque. These characteristics ensure long service life and economical operation.

Complete with 20 metres of cable.

Starters available at extra cost.

1. New DP50 6" or 8"
2. Reconditioned DP50 6" or 8"
3. More models available - P.O.A

View: (New) (Reconditioned) (In Action )

Data Sheet | Enquire

Tsurumi LH25.5

The LH series are heavy-duty, high head pumps that provide exceptional wear resistance and outstanding performance in the toughest civil engineering or water supply projects. Constructed of cast iron, the centre discharge design reduces the base area size and facilitates locating and positioning in confined spaces.

This design also enables efficient motor cooling when pumping small amounts of water or even during dry running conditions.

This pump has only been used for 6 days and comes with 6 months warranty.

Supplied with 10 metres of heavy duty, H07RN-F rubber power cable.

Applications

• Civil engineering
• Quarries
• Mining
• Deep excavations

Head - 60m

Power - 5.5kW

Flow - 470 l/min

View (1) (2) (3) (4) (5)

Curve | Enquire

Robot Pumps

We have a range of Robot pumps made for abbrasive applications including 2", 3", 4" and 6" models.

Applications

• Most abbrasive applications.

View | Enquire

D430

Flygt 2125 Pump.
Bauer fitting outlet included.

The Flygt Bibo series deliver in the toughest of dewatering tasks. These hard wearing, lightweight pumps are found in operation in all types of dewatering applications.

Applications

• Construction.
• Mining & quarrying.
• Tunneling.
• General dewatering.

Head - 55m.

Power - 8.0kW.

Speed - 2800RPM (50Hz).

View | Curve | Enquire

S363

SPP ROBOT Pump with 2" outlet, torque flow impeller for sand pumping. Bought new for project that never happened. Made from high chrome steel.

Applications

• Sand Pumping.
• Concrete batching plants.

Flow - 30m³ hour @ 15m.

View (1) (2) (3) (4) (5)

Enquire

S870

Pumpex 254F pump. Fixing is guide rail, can be adapted to stool-free standby.

Power - 62kW (415V).

Outlet - 150mm.

Head - 640 m³ Hr @ 27m.

View (1) (2) (3) (4)

Data Sheet | Enquire

S660

Pumpex KP154F solids handling pump. Fixing is guide rail, can be adapted to stool-free standby.

Hours - 12-1300.

Head - 150mm.

Flow - 600 m³ hr.

Power - 55kW (415V).

View (1) (2)

Data Sheet | Enquire

Weda 10" 2200 Pump

Weda 10" 2200 clean water pump. This pump is sold as seen as motor is burnt out.

Flow - 800 m³ @ 10m.

Power - 37kW (415V).

Speed - 2900RPM (50Hz).

View (1) (2) (3)

Enquire

4" Submersible Sandy Pump

SPP 4" Robot submersible sandy pump, with agitator.

The Robot wear resistant submersible vortex pumps are designed for the continuous transport of highly abrasive solids. Natural low wear is experienced in these pumps as most abrasives pass in front of the impeller without touching it. The recessed vortex impeller leaves a wide unobstructed passage through the volute, making blockages hardly possible.

Applications

• Sewage
• Food processing
• General industry
• Water Control

View (1)

Enquire

Vaughan V00841

Vaughan V00841 8" semi submersible shaft pump with chopper blade. Pre impeller shaft about 1.2m. Used for 3 months. Vaughan pumps incorporate a unique combination of chopping and pumping, which delivers a truly non-clog system and as a result handle larger solids.

Applications

• Treatment Works
• Farm slurrys

Flow - 680 m³ hour.

Power - 60hp (45kW).

Speed - 970RPM.

View (1) | (curve)

Enquire

Grindex 3" Sandy Pump

Grindex 3" sandy pump with rubber liner. Used for less than 6 months. Sold in good working order.

Power - 7.5kW (415V)

View (1) (2) (curve)

Enquire

Diaphragm Air Pump

Diaphragm air pumps, all good working order made by Wilden, Ingersoll Rand and Blagdon. Great self priming, good heads, flows well and a very quiet operation in cast iron, stainless and alloy.

View (1)

Enquire

Weda L154 2"

Weda L154 2" pump with hose tail outlet and cable. Ideal for pond drainage. Quality pump.

Power - 415V.

Flow - 120gpm @ 20 ft.

View (1) (2) (3) (4) (5) | Enquire

Weda L554-3

Weda L550 series 4" pump with cable and 4" Bauer outlet.

The pump is a submersible drainage pump of high capacity and medium head. The pump is equipped with a built-in contactor which starts the pump when the cable is connected and interrupts the current to the motor at excessively high temperatures. Designed for continuos use.

Applications

• Land drainage
• Construction

Flow - 450gpm @ 30 ft.

Power - 10.2hp (7.5kW).

Speed - 2900RPM (50Hz).

View (1) (2) (3) (4) (5) (curve) | Enquire

D301

Flygt 2066 Submersible Pump.

The Flygt Bibo series deliver in the toughest of dewatering tasks. These hard wearing, lightweight pumps are found in operation in all types of dewatering applications.

Applications

• Construction.
• Mining & quarrying.
• Tunneling.
• General dewatering.

View | Curve | Enquire

D310

Flygt D310 Submersible Pump.

The Flygt Bibo series deliver in the toughest of dewatering tasks. These hard wearing, lightweight pumps are found in operation in all types of dewatering applications.

Applications

• Construction.
• Mining & quarrying.
• Tunneling.
• General dewatering.

View | Curve | Enquire

Centrifugal 2" Air Pump

Centrifugal 2" air pumps, 3 in stock, ideal to empty end driven piles pre-conrete.

View (1)

Enquire