Stuart well Services Ltd

Tel: +44 (0) 1953 454540

Fax: +44 (0) 1953 456968

part of the Stuart group

Wellscreen/Well Liners

Air Sparging

Well materials are available in uPVC, HDPE and Steel. PVC liners are available from a nominal diameter of 19mm up to 200mm.
BS 6920:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water.

Wellscreen, Well Liners Sizes

Well materials are available in uPVC, HDPE and Steel.

PVC liners are available from a nominal diameter of 19mm up to 200mm. Our well liners are suitable for use in water abstraction projects (BS 6920:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with  regard to their effect on the quality of the water).

Various machined slot sizes to allow for ground conditions are available. The pipe is stocked in lengths of 1m and 3m, with each length being male/female threaded so that installations can be suited to specific site conditions, in 50mm normal diameter HDPE and uPVC, we also stock 2m section of plain and slotted.

For specification of these materials the following criteria should be stated:

"uPVC casing and wellscreens shall be supplied by an ISO9001 approved manufacturing company, the pipe shall be male/female threaded with machined slots on the wellscreen.

The slots shall be horizontal to the pipe length to prevent slot compressions. The pipe shall be an approved product under the Water Regulations advisory scheme." (BS 6920:2000 Suitability of non-metallic products for use in contact with water intended for human consumption with  regard to their effect on the quality of the water). 

ND MOD MOSD MID
28 19 28 280m
33.5 24 33.5 450m
42 35 46 320m
60 50 60 320m
88 80 95 90m
113 100 120 90m
125 115 130 60m
140 125 148 100m
165 150 172 35m
165 150 174 90m
225 200 235 35m

*Not water byelaws approved product

Key
ND = Nominal Diameter (mm)
MOD = Maximum Outside Diameter (mm)
MOSD = Maximum Over Socket Diameter (mm)
MID = Maximum Installation Depth

High Density Polyethylene Liners

Stuart Well Services supply a range of well-linings for site investigations, dewatering wells, leachate abstraction wells, water abstraction wells, soakaways and gas abstraction wells.

These are manufactured to meet the requirements of ISO9001: 1994. Pipes are male-female threaded in lengths of 1 and 3 metres.

Specifications are as follows:

  • Manufactured from High Density Polyethylene (HDPE)
  • High temperature resistance
  • Vicat softening point 125ยบ ISO R 306 (B)
  • Resistant to aggressive chemical found in landfill sites
  • High strength, tough and durable
  • Threaded, giving maximum strength of joint with rapid assembly - flush joints
  • Metric sizes to suit all horizontal pipework
  • Manufactured to DIN 8074
  • Landfill site proven for over 10 years
Outside Diameter (mm) Inside Diameter (mm)
40 28
63 51.4
90 73.6
110 97.4
160 141.8

Other dimensions and wall thickness are available on request up to 630mm diameter.

Slot sizes are 1mm standard, other sizes available on request .

Wire Wrapped Wellscreen

Using a wire wedge wellscreen has specific advantages over other steel screens and allow high flows of sand free water into the well because of:

Wire Wrapped Wellscreen
  • A large open area
  • Close slot tolerance to control fines
  • Efficient well yielding
  • No plugging

Wellscreens are made in a range of stainless steels 304 or 316 and other weldable metals in a wide range of diameters and slot sizes from 0.25mm to 4mm.

Screens and casings are manufactured to customer requirements with threaded or flange connectors, lead time is up to 10 weeks, so please enquire early.

Available to order as not stocked

Bridge Slotted Wellscreen

Bridge slot screens are formed by punching openings into a flat sheet that is subsequently rolled into a tube and welded.

Bridge Slotted Wellscreen

The openings are arranged in staggered rows to maintain the screen's strength.

Advantages of this screen are high strength through resistance to twisting, compressive and tensile forces.

  • Slot sizes from 1.0mm to 4mm
  • Wall thickness 6mm or 10mm
  • Diameters from 150mm to 1000mm
  • Open area 6% to 23%

Available to order as not stocked

Simple Slotted Screen

Simple Slotted Well Screen

These are formed from perforated plate that is rolled and welded. The holes are rectangular in shape and arranged in rows with the longer side of the slot in alignment with the pipe axis.

  • Slot sizes from 3mm to 6mm
  • Wall thickness 3mm to 10mm
  • Open area 14% to 23%

Available to order as not stocked

Make Enquiry

Related Services

Geothermal

Ground source heat loop installation

ground source heat loop
Water Well Drilling ground source heat loop
Go Top
Stuart Group Ltd © 2017 All Rights Reserved.
Terms & ConditionsCookie LawHealth & SafetyEnvironmental & SustainabilityCHAS AccreditationQualityContactSite Map