ENM pumps are self-priming and have bronze bodies and single impellers. They have 316 stainless steel shafts, fitted with carbon ceramic and NBR mechanical seals. (Viton is available at extra cost). The IP44 motors have a forward and reverse switch for filling and emptying duties. They are also available in 3phase as ENT pumps. They are designed mainly for pumping clean liquids at temperatures up to a maximum of 90ºC, but can also handle very small soft solids, in suspension. Maximum recommended suction lift, with a foot valve, is 6 meters. These are good, general-purpose, portable pumps for circulating and transfer of water, sea-water, juices, gas oil (“red diesel”), solvents or products with a low flash point. All models are supplied free-standing, so for ease of handling and added protection, a full frame is a worthy investment as an optional extra.
Model | Inlet (mm) | Outlet (mm) | kW | volt | Flow (l/min) | Head (m) | Weight (kgs) | Price (£) |
---|---|---|---|---|---|---|---|---|
ENM20 | 20 | 20 | 0.37 | 110-230 | 35 | 27 | 6.4 | £148.34 |
ENM25 | 25 | 25 | 0.45 | 110-230 | 55 | 13 | 9.5 | £207.35 |
ENT25 | 25 | 25 | 0.45 | 400 | 55 | 13 | 9.5 | £196.98 |
ENM30 | 30 | 30 | 0.75 | 110-230 | 90 | 16 | 12.50 | £269.56 |
ENT30 | 30 | 30 | 0.75 | 400 | 90 | 16 | 12.50 | £257.59 |
ENM40 | 40 | 40 | 0.90 | 110-230 | 155 | 18 | 14.70 | £287.90 |
ENT40 | 40 | 40 | 0.90 | 400 | 155 | 18 | 14.70 | £276.73 |
ENM50 | 50 | 50 | 1.50 | 230 | 260 | 24 | 24.30 | £425.07 |
ENT50 | 50 | 50 | 1.50 | 400 | 260 | 24 | 24.30 | £425.07 |
ENM25-S | 25 | 25 | 1.50 | 110-230 | 100 | 48 | 15.80 | £262.38 |
ENT25-S | 25 | 25 | 1.50 | 400 | 100 | 48 | 15.80 | £251.21 |